Haltech NEXUS Rebel K Kit - Suits Honda K-Series - HT-220206

Haltech NEXUS Rebel K - plug-in ready ECU and harness kit for Honda K-series

Suits: K20A K24A K24Z (Manual Transmissions Only)

Notes: Does Not Support Automatic transmissions, OEM air temperature sensor, OEM knock sensor, OEM O2 sensor, VTEC pressure switch, Thermofan switch, Reverse switch (transmission), Serial communications with factory-fitted Honda DBW modules, Serial communications with factory-fitted Honda BCM / ICC modules (no factory A/C request, coolant gauge, etc), Low impedance injectors

With the Rebel K, all the hard work is done. It is the best, quickest, and easiest way to get your K-swap up and running!:

ECU designed from the ground up to suit Honda's popular K engines Start-up is a breeze thanks to the new Rebel K Set-up Wizard in our NSP software Comes complete with an easy-to-install harness to suit Honda K applications Easy integration with Haltech dashes, PDMs, sensor kits, and accessories Kit Supports:

K20A K24A K24Z Manual Transmissions Only - Kit supplied with sub-harnesses to suit 2002-04 and 2005+ Honda K series transmissions

Please note:

No ignition sub-harness required - factory K-series ignition coil connectors are built into the harness Kit supplied with both cable throttle and DBW throttle sub-harnesses Kit supplied with Keihin injector harness. EV6 (USCAR), EV1 and Sumitomo (Denso) injector harnesses available to be purchased separately - see part numbers HT-186013, HT-186014, HT-186015

Does Not Support:

Automatic transmissions, OEM air temperature sensor, OEM knock sensor, OEM O2 sensor, VTEC pressure switch, Thermofan switch, Reverse switch (transmission), Serial communications with factory-fitted Honda DBW modules, Serial communications with factory-fitted Honda BCM / ICC modules (no factory A/C request, coolant gauge, etc), Low impedance injectors

Kit Includes:

• HT-220003 - Nexus Rebel K ECU
• HT-186402 - Nexus Rebel K main terminated harness
• HT-186130 - Cabin adaptor harness
• HT-186122 - Alternator adaptor harness
• HT-186133 - Honda APP adaptor harness
• K20 and K24 crank sensor connectors
• Pack of connectors and pins to terminate spare inputs and outputs
• HT-186016 - i4 Keihin primary injector harness
• HT-186168 - Honda DBW throttle sub-harness
• HT-186169 - Honda cable throttle sub-harness
• HT-187011 - Nexus 02-04 Honda transmission sub-harness
• HT-187012 - Nexus 05+ Honda transmission sub-harness

Sensor Pack:

• Bosch LSU 4.9 Sensor
• Weld on fitting for O2 Sensor
• Air Temperature Sensor 1/8 NPT
• Weld on fitting for Air Temp Sensor
• Bosch Knock Sensor with stud adaptor and M8 nut

Quick start guide, wiring diagrams and manuals are available on the Haltech product page.

Motorsport Tuning Solutions is an authorised Haltech dealer on the Gold Coast. Need it installed and dyno tuned on our Mainline ProHub dyno? Get in touch for a quote.