top of page

Easy to install. Affordable. Reliable.  
G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V10 EJ25. These ECUs cover 2.5L from 2004 to 2007. 
 

  • Please check your connector matches the header in the listed photo and check the notes in italic below before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  


Suitable Applications:
The WRX104X (listed separately) mostly covered the 2004-2006 range.
The WRX107X mostly covers the 2007 model.
 
However, some 2006 models require the WRX107X 
 
*The fastest and most reliable way to tell, is to check whether pins A1-3 are populated. 

*If the pins have wires, you need the WRX104X, if there are no wires, you need the WRX107X 

*Suits GD or GG chassis with electronic throttle.  Not suitable for the GR/GH/GE/GV hatchback or 3rd generation WRX’s

LINK G4X WRXLink (V10) - WRX107X

$2,450.00 Regular Price
$2,150.00Sale Price
  • G4X PlugIn Key Features (where applicable):
    Up to 6D fuel and ignition mapping
    Precision closed loop cam control (four cam, independent control)
    Sequential fuel delivery
    Digital triggering, all OEM patterns
    OEM idle hardware supported
    5D boost control with three switchable tables
    Motorsport features - antilag, launch, flat shift
    Continuous barometric correction (on board)
    CAN port
    QuickTune - automated fuel tuning
    Individual cylinder correction
    USB tuning cable included
    Stats recording into on-board memory
    Gear compensations for spark, boost and fuel
    Real time selectable dual fuel, ignition and boost maps
    Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
    Boost control referenced to gear, speed or throttle position
    512 mega bytes data logging memory
    Staged injection
    Knock with "windowing"

    There are two different options for the expansion connectors, depending on whether your ECU is the 2004-2006 ECU or the 2006-2007 ECU. 

    2004-2006 ECU 
    The following expansion connector inputs/outputs are provided: 
    Blank                AN Volt 11 
    An Temp 4        Temperature sensor input 
    Blank                No function 
    Blank                AN Volt 12 
    Blank                No function 
    Blank                No function 
    +5V Out        Low Current +5V Supply 
    Gnd                Sensor Ground Only 


    2006-2007 ECU 
    The 2006-2007 V10 ECU contains an 8 pin expansion connector. 
    The following expansion connector inputs/outputs are provided: 
    Aux 11                Auxiliary Output 
    An Temp 4        Temperature sensor input 
    Aux 12                Auxiliary Output 
    Volt 11                Analog 0-5V input 
    Aux 13                Auxiliary Output 
    DI 11                Digital Input 
    +5V Out        Low Current +5V Supply 
    Gnd                Sensor Ground Only  

bottom of page